those of you following along with this blog already know i got the pan in, well my good mate Phil Champion came over and helped with the next step of the build, that is the spin of the board, this will add the much needed strength to the board, you can see the full photos in the gallery but here are a couple just to give you an idea of what will be happening. Phil Measuring up one of the channels then we cut that little sucka! then we work out why things won't line up, and realize.......this was the piece i measured. so we cut it again. that's better now. Then we do a mock up to check clearances and make sure it's all good before i weld it all together.
check back for more and if you got this far don't forget to click the like button at the bottom of the blog and help me get the word out there, thanks again for checking in :) |
Partners:
Supporters:
Archives
August 2016
Categories
All
|
www.jetluge.com.au / CONTACT |
© Copyright JetLuge.com.au 2009-2016. All rights reserved.
|